Fix too-aggressive verification notifications on startup by starting a
conversation with the right initial verified state, and then making sure
to fetch() before setting a new verified state.
FREEBIE
New experience in the Message Detail view when outgoing identity key
errors happen, matching the Android View.
'View' button is only shown on outgoing key errors right now.
When a contact with an outgoing identity key error is clicked, they are
taken to a view like the popup that comes up on Android: an explanation
of what happened and three options: 'Show Safety Number', 'Send Anyway',
and 'Cancel'
Contacts are now sorted alphabetically, with the set of contacts with
errors coming before the rest.
FREEBIE
If the key has changed, saveIdentity will archive sibling sessions, but not the
session for the device it was called on. Therefore we have to archive that one
by hand.
Also switch from saving the identity of an OutgoingIdentityKeyError to just
triggering a profile fetch, mostly for consistency, simplicity, and DRYness.
// FREEBIE
Sessions established with the previous identity should no longer be used for
sending, so we should close them.
Since we've added this call to saveIdentity, we can omit the call to it after
profile fetches.
// FREEBIE
Not yet using the new APIs, but ready to. Still to do:
- Send sync messages on trust decisions
- Respond to received trust decision sync messages
- Show trust decisions in the conversation history
- In that rare situation where a sent message ends up with a key error
make it easy to retry the send.
FREEBIE
Also:
- All the necessary wire-up to update things in real time. If you have
a safety number page up via a group member view as well as via a 1:1
conversation with that contact, they'll both be updated as the
underlying model changes. Similarly, the overall group will update
in real-time as members change.
- A bit of special-casing for yourself in a group conversation - you're
shown as 'me' and are not clickable, where normally that would take you
to the Safety Number screen for that contact. You are also not included
in the trust calculations for a given group.
FREEBIE
Multiple cases here:
1. setting our own key on registration
1. changing identities from a safety number change dialog
Note that removeIdentityKey runs before saveIdentity, so we'll always end up
with firstUse: true on our own key.
// FREEBIE
saveIdentity is now reponsible for determining firstUse, so we must not remove
the existing key before updating it.
Previously, the implementation provided an extra check against overwritting an
existing key, but that should be done via isTrustedIdentity instead.
// FREEBIE
We will now always attempt to mark things unread if this method. If the
conversation's unreadCount gets out of date, set to zero, we will still
do it. If we go through the motions, and nothing is newly marked read,
we will still set the unreadCount to zero.
We queue the job because we often get a whole lot of read receipts at
once, and their markRead calls could very easily overlap given the async
pull from DB.
We also disable read receipts for any message marked read due to a read
receipt. That's a notification explosion we don't need.
FREEBIE
We mark as read everything older than this message - to clean up old
stuff still marked unread in the database. If the user generally doesn't
read in the desktop app, so the desktop app only gets read receipts, we
can very easily end up with messages never marked as read (our previous
early read receipt handling, read receipts never sent because app was
offline).
FREEBIE
This is no longer guaranteed to be true. If you're scrolled up in a
conversation, you may not have read all messages. Setting the
unreadCount to zero will prevent the user from marking any of their
existing messages as unread until something else happens, like receiving
a read receipt or new message.
FREEBIE
- Only mark messages read when scrolling if in focus and visible
- Remove last seen indicator when scrolling to the bottom with scroll
down button
- Update last seen indicator when we don't already have one and we're
scrolled up.
FREEBIE
Bind a single listener to keychange events from the storage interface,
which then looks up relevant conversations and adds notices to them,
with tests.
Previously we would need to instantiate a conversation model in order to
start listening to its key change events. In practice this usually
happens at startup but we shouldn't rely on it, and it incurs higher
overhead since it creates a different listener for each conversation.
// FREEBIE
This reverts commit a768b94471.
d2ddfc7 was enough to fix#989. Removing unregistered members from the
group (as opposed to silently ignorning them) creates greater potential
for getting out of sync with the member lists on other devices.
// FREEBIE
Don't set lastMessage, let it update itself as needed, such as when
first rendering a conversation list item, and when its messages are
sent, received, or destroyed.
Let received_at be the current time for keychanges. This avoids them
being inserted in the wrong place in the thread.
Use the newmessage event to trigger frontend listeners to add them to
the conversation view if it is open.
There are some cases when we want to initialize a group object without
loading its contacts, such as while processing delivery receipts. We
really only need to load the contacts for a group/convo when we are
rendering it, so let the front end handle those cases (which most of
them do already).
When initialized, or when expiration-related attributes change, expiring
messages will set timers to self-destruct. On self-destruct they trigger
'expired' events so that frontend listeners can clean up any collections
and views referencing them.
At startup, load all messages pending expiration so they can start their
timers even if they haven't been loaded in the frontend yet.
Todo: Remove expired conversation snippets from the left pane.
Move away from inline style attributes for setting contact colors.
Apply colors by name via css classes instead. Also lays groundwork
for syncing contact colors.
// FREEBIE
Fixes a session management problem where, after resolving a conflict
with some contact, that contact would get bad mac as a result of us
sending them a new prekey message before processing a pending conflicted
prekey message received from them earlier.
Fixes#806
// FREEBIE
When deleting all messages in a conversation, the entry in the left pane
should be inserted into the alphabetical portion of the list. To keep it
in this collection, do not nullify active_at.
To ensure the list view is keeping itself correctly sorted, make sure
that resorting behavior is triggered any time a relevant attribute is
changed.
This fixes deleted conversations jumping to the top of the list, and
conversation order scrambling when getting a group or contact sync
message from our master device.
Fixes#734
// FREEBIE
Previously, if a message was sent in between the receive time of an
incoming message and the time it is actually added to the conversation's
message collection (which only occurs later after several async
callbacks), the incoming message would be inserted not-at-the-end of the
collection since it is ordered by receive time. This tricked the front
end into assuming the message was an older message instead of a new one.
Fixes#490
// FREEBIE
Remove individual messages from Notifications when marked read.
Previously this was only done from the conversation model when marking
the entire conversation as read.
Fixes#717
// FREEBIE
Since the introduction of infinite scroll, the delete messages function
has only deleted the currently loaded set of messages in a conversation.
To fix this, we should fetch all the messages and then delete them.
Fixes#645
// FREEBIE
Refactor libphonenumber.validateNumber into libphonenumber.parseNumber,
which encapsulates the try-catch pattern used in number parsing and
returns an object of info about the input number rather tha throwing
since we expect to get some invalid number inputs the user is typing.
In the conversation model,
* Separate phone number validation from search token updating.
* Perform token update before save if the number was valid.
* Stop storing unneeded number variants as conversation properties.
// FREEBIE
Search box finds or creates a conversation given a phone number in
local (to the user's region) or international format.
Previously you had to enter e164 format to set up the conversation
correctly.
If the number is not valid, do not open the conversation.
TODO: user feedback on invalid numbers.
// FREEBIE
Previously, libtextsecure would send a sync message automatically
when appropriate. This fails if any recipient has a key conflict
or if our network connection fails mid-send.
Instead, when appropriate, return a the DataMessage encoded as an array
buffer for later syncing. This lets the application choose when to send
it, which we now do after any successful send to a recipient, rather
than after all recipients are successfully sent to.
Eventually we should move the DataMessage protobuf construction and
group sending logic to the application layer entirely, in which case
we wouldn't need libtextsecure to construct the sync message either.
Fixes#408
Create a cleaner seperation between generating notifications
and updating frontend conversation views. The former is now
handled by `conversation.notify` while the latter is achieved
by triggering an event on the conversation model, which will
only be acted on if there are any views listening for it.
Additionally, instead of re-fetching the entire message history,
which is overkill, just add or update the new/modified message.
This will help speed up the newmessage event handler and also
help avoid unnecessary re-rendering when resolving key conflicts.
// FREEBIE
Previously, with a mix of text and media messages in conflict,
asynchronous callbacks aligned so as to fail to remove some of
the conflict objects on messages.
Fix by serializing conflict processing, but making sure to move
on through the message list even if some conflict resolutions fail.
Fixes#370
// FREEBIE
Using the search field produces a filtered view of all contacts and
groups containing the input. To make this fast and scalable, add an
index on a 'tokens' array containing words from the conversation name
and different forms of phone number.
Closes#365
// FREEBIE
Refactor outgoing message error handling to use the same success and
error handlers. This creates a somewhat strange pattern, where we call
send and pass in the promise that resolves when sending is complete, but
there's enough variety in the libtextsecure syntax for different message
sending routines that it belongs at the conversation level and only the
post-processing stuff is really shared by all messages.
// FREEBIE
When resolving conflicts, we should not only discard the old key, but
set the new trusted key to the one the user has verified. Previously, we
would end up trusting the first-seen new key, which may not be the one
the user verified.
// FREEBIE
This trigger function uses chrome's runtime message passing api, which
traverses between different windows in our runtime, but we only trigger
the updateInbox event from the backgroud page, so we don't need to use
that api, which requires some extra cpu/memory overhead.
// FREEBIE
We're overriding the default with null often enough that we should
just change the default.
Consequently, no more phantom blank conversations with oneself should
appear after receiving a group update. They were being added to the
inbox because they were incorrectly initialized with an active_at value.
Fixes#281
The unset function, and the series of events/callbacks triggered by its
use, are not as similar to the set/save functions as previously
anticipated, leading to flux in the state of the 'pending' attribute.
Fixes#283
// FREEBIE
Fixes#264
Implement the equivalent of java's String.hashCode on the conversation model.
Change avatar template and attributes. Use css classes for colors.
Scott Nonnenberg
lilia
Sam Vevang
haffenloher
Karel Bilek
Georg Semmler