You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
session-ios/SignalServiceKit/src/Messages/Attachments/OWSAttachmentsProcessor.m

443 lines
19 KiB
Matlab

//
// Copyright (c) 2018 Open Whisper Systems. All rights reserved.
//
#import "OWSAttachmentsProcessor.h"
#import "AppContext.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
#import "Cryptography.h"
#import "MIMETypeUtil.h"
#import "NSNotificationCenter+OWS.h"
#import "OWSBackgroundTask.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
#import "OWSError.h"
#import "OWSPrimaryStorage.h"
#import "OWSRequestFactory.h"
#import "OWSSignalServiceProtos.pb.h"
#import "TSAttachmentPointer.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
#import "TSAttachmentStream.h"
#import "TSGroupModel.h"
#import "TSGroupThread.h"
#import "TSInfoMessage.h"
#import "TSMessage.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
#import "TSNetworkManager.h"
#import "TSThread.h"
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
#import <YapDatabase/YapDatabaseConnection.h>
NS_ASSUME_NONNULL_BEGIN
NSString *const kAttachmentDownloadProgressNotification = @"kAttachmentDownloadProgressNotification";
NSString *const kAttachmentDownloadProgressKey = @"kAttachmentDownloadProgressKey";
NSString *const kAttachmentDownloadAttachmentIDKey = @"kAttachmentDownloadAttachmentIDKey";
// Use a slightly non-zero value to ensure that the progress
// indicator shows up as quickly as possible.
static const CGFloat kAttachmentDownloadProgressTheta = 0.001f;
@interface OWSAttachmentsProcessor ()
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
@property (nonatomic, readonly) TSNetworkManager *networkManager;
@property (nonatomic, readonly) OWSPrimaryStorage *primaryStorage;
@end
@implementation OWSAttachmentsProcessor
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
- (instancetype)initWithAttachmentPointer:(TSAttachmentPointer *)attachmentPointer
networkManager:(TSNetworkManager *)networkManager
primaryStorage:(OWSPrimaryStorage *)primaryStorage
{
self = [super init];
if (!self) {
return self;
}
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
_networkManager = networkManager;
_primaryStorage = primaryStorage;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
_supportedAttachmentPointers = @[ attachmentPointer ];
_supportedAttachmentIds = @[ attachmentPointer.uniqueId ];
return self;
}
- (instancetype)initWithAttachmentProtos:(NSArray<OWSSignalServiceProtosAttachmentPointer *> *)attachmentProtos
relay:(nullable NSString *)relay
networkManager:(TSNetworkManager *)networkManager
primaryStorage:(OWSPrimaryStorage *)primaryStorage
transaction:(YapDatabaseReadWriteTransaction *)transaction
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
{
self = [super init];
if (!self) {
return self;
}
_networkManager = networkManager;
_primaryStorage = primaryStorage;
NSMutableArray<NSString *> *attachmentIds = [NSMutableArray new];
NSMutableArray<TSAttachmentPointer *> *supportedAttachmentPointers = [NSMutableArray new];
NSMutableArray<NSString *> *supportedAttachmentIds = [NSMutableArray new];
for (OWSSignalServiceProtosAttachmentPointer *attachmentProto in attachmentProtos) {
OWSAssert(attachmentProto.id != 0);
OWSAssert(attachmentProto.key != nil);
OWSAssert(attachmentProto.contentType != nil);
// digest will be empty for old clients.
NSData *digest = attachmentProto.hasDigest ? attachmentProto.digest : nil;
TSAttachmentType attachmentType = TSAttachmentTypeDefault;
if ([attachmentProto hasFlags]) {
UInt32 flags = attachmentProto.flags;
if ((flags & (UInt32)OWSSignalServiceProtosAttachmentPointerFlagsVoiceMessage) > 0) {
attachmentType = TSAttachmentTypeVoiceMessage;
}
}
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
TSAttachmentPointer *pointer = [[TSAttachmentPointer alloc] initWithServerId:attachmentProto.id
key:attachmentProto.key
digest:digest
byteCount:attachmentProto.size
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
contentType:attachmentProto.contentType
relay:relay
sourceFilename:attachmentProto.fileName
attachmentType:attachmentType];
[attachmentIds addObject:pointer.uniqueId];
[pointer saveWithTransaction:transaction];
[supportedAttachmentPointers addObject:pointer];
[supportedAttachmentIds addObject:pointer.uniqueId];
}
_attachmentIds = [attachmentIds copy];
_supportedAttachmentPointers = [supportedAttachmentPointers copy];
_supportedAttachmentIds = [supportedAttachmentIds copy];
return self;
}
// Remove this?
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
- (void)fetchAttachmentsForMessage:(nullable TSMessage *)message
primaryStorage:(OWSPrimaryStorage *)primaryStorage
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
success:(void (^)(TSAttachmentStream *attachmentStream))successHandler
failure:(void (^)(NSError *error))failureHandler
{
[[primaryStorage newDatabaseConnection] readWriteWithBlock:^(YapDatabaseReadWriteTransaction *transaction) {
[self fetchAttachmentsForMessage:message
transaction:transaction
success:successHandler
failure:failureHandler];
}];
}
- (void)fetchAttachmentsForMessage:(nullable TSMessage *)message
transaction:(YapDatabaseReadWriteTransaction *)transaction
success:(void (^)(TSAttachmentStream *attachmentStream))successHandler
failure:(void (^)(NSError *error))failureHandler
{
OWSAssert(transaction);
for (TSAttachmentPointer *attachmentPointer in self.supportedAttachmentPointers) {
[self retrieveAttachment:attachmentPointer
message:message
transaction:transaction
success:successHandler
failure:failureHandler];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
}
}
- (void)retrieveAttachment:(TSAttachmentPointer *)attachment
message:(nullable TSMessage *)message
transaction:(YapDatabaseReadWriteTransaction *)transaction
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
success:(void (^)(TSAttachmentStream *attachmentStream))successHandler
failure:(void (^)(NSError *error))failureHandler
{
OWSAssert(transaction);
__block OWSBackgroundTask *backgroundTask = [OWSBackgroundTask backgroundTaskWithLabelStr:__PRETTY_FUNCTION__];
[self setAttachment:attachment isDownloadingInMessage:message transaction:transaction];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
void (^markAndHandleFailure)(NSError *) = ^(NSError *error) {
// Ensure enclosing transaction is complete.
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
[self setAttachment:attachment didFailInMessage:message error:error];
failureHandler(error);
backgroundTask = nil;
});
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
};
void (^markAndHandleSuccess)(TSAttachmentStream *attachmentStream) = ^(TSAttachmentStream *attachmentStream) {
// Ensure enclosing transaction is complete.
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
successHandler(attachmentStream);
if (message) {
[message touch];
}
backgroundTask = nil;
});
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
};
if (attachment.serverId < 100) {
DDLogError(@"%@ Suspicious attachment id: %llu", self.logTag, (unsigned long long)attachment.serverId);
}
TSRequest *request =
[OWSRequestFactory attachmentRequestWithAttachmentId:attachment.serverId relay:attachment.relay];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
[self.networkManager makeRequest:request
success:^(NSURLSessionDataTask *task, id responseObject) {
if (![responseObject isKindOfClass:[NSDictionary class]]) {
DDLogError(@"%@ Failed retrieval of attachment. Response had unexpected format.", self.logTag);
NSError *error = OWSErrorMakeUnableToProcessServerResponseError();
return markAndHandleFailure(error);
}
NSString *location = [(NSDictionary *)responseObject objectForKey:@"location"];
if (!location) {
DDLogError(@"%@ Failed retrieval of attachment. Response had no location.", self.logTag);
NSError *error = OWSErrorMakeUnableToProcessServerResponseError();
return markAndHandleFailure(error);
}
dispatch_async([OWSDispatch attachmentsQueue], ^{
[self downloadFromLocation:location
pointer:attachment
success:^(NSData *_Nonnull encryptedData) {
[self decryptAttachmentData:encryptedData
pointer:attachment
success:markAndHandleSuccess
failure:markAndHandleFailure];
}
failure:^(NSURLSessionDataTask *_Nullable task, NSError *_Nonnull error) {
if (attachment.serverId < 100) {
// This looks like the symptom of the "frequent 404
// downloading attachments with low server ids".
NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *)task.response;
NSInteger statusCode = [httpResponse statusCode];
OWSFail(@"%@ %d Failure with suspicious attachment id: %llu, %@",
self.logTag,
(int)statusCode,
(unsigned long long)attachment.serverId,
error);
}
if (markAndHandleFailure) {
markAndHandleFailure(error);
}
}];
});
}
failure:^(NSURLSessionDataTask *task, NSError *error) {
if (!IsNSErrorNetworkFailure(error)) {
OWSProdError([OWSAnalyticsEvents errorAttachmentRequestFailed]);
}
DDLogError(@"Failed retrieval of attachment with error: %@", error);
if (attachment.serverId < 100) {
// This _shouldn't_ be the symptom of the "frequent 404
// downloading attachments with low server ids".
NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *)task.response;
NSInteger statusCode = [httpResponse statusCode];
OWSFail(@"%@ %d Failure with suspicious attachment id: %llu, %@",
self.logTag,
(int)statusCode,
(unsigned long long)attachment.serverId,
error);
}
return markAndHandleFailure(error);
}];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
}
- (void)decryptAttachmentData:(NSData *)cipherText
pointer:(TSAttachmentPointer *)attachment
success:(void (^)(TSAttachmentStream *attachmentStream))successHandler
failure:(void (^)(NSError *error))failureHandler
{
NSError *decryptError;
NSData *plaintext = [Cryptography decryptAttachment:cipherText
withKey:attachment.encryptionKey
digest:attachment.digest
unpaddedSize:attachment.byteCount
error:&decryptError];
if (decryptError) {
DDLogError(@"%@ failed to decrypt with error: %@", self.logTag, decryptError);
failureHandler(decryptError);
return;
}
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
if (!plaintext) {
NSError *error = OWSErrorWithCodeDescription(OWSErrorCodeFailedToDecryptMessage, NSLocalizedString(@"ERROR_MESSAGE_INVALID_MESSAGE", @""));
failureHandler(error);
return;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
}
TSAttachmentStream *stream = [[TSAttachmentStream alloc] initWithPointer:attachment];
NSError *writeError;
[stream writeData:plaintext error:&writeError];
if (writeError) {
DDLogError(@"%@ Failed writing attachment stream with error: %@", self.logTag, writeError);
failureHandler(writeError);
return;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
}
[stream save];
successHandler(stream);
}
- (void)downloadFromLocation:(NSString *)location
pointer:(TSAttachmentPointer *)pointer
success:(void (^)(NSData *encryptedData))successHandler
failure:(void (^)(NSURLSessionDataTask *_Nullable task, NSError *_Nonnull error))failureHandler
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
{
AFHTTPSessionManager *manager = [AFHTTPSessionManager manager];
manager.requestSerializer = [AFHTTPRequestSerializer serializer];
[manager.requestSerializer setValue:OWSMimeTypeApplicationOctetStream forHTTPHeaderField:@"Content-Type"];
manager.responseSerializer = [AFHTTPResponseSerializer serializer];
manager.completionQueue = dispatch_get_main_queue();
// We want to avoid large downloads from a compromised or buggy service.
const long kMaxDownloadSize = 150 * 1024 * 1024;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
// TODO stream this download rather than storing the entire blob.
__block NSURLSessionDataTask *task = nil;
__block BOOL hasCheckedContentLength = NO;
task = [manager GET:location
parameters:nil
progress:^(NSProgress *_Nonnull progress) {
OWSAssert(progress != nil);
// Don't do anything until we've received at least one byte of data.
if (progress.completedUnitCount < 1) {
return;
}
void (^abortDownload)(void) = ^{
OWSFail(@"%@ Download aborted.", self.logTag);
[task cancel];
};
if (progress.totalUnitCount > kMaxDownloadSize || progress.completedUnitCount > kMaxDownloadSize) {
// A malicious service might send a misleading content length header,
// so....
//
// If the current downloaded bytes or the expected total byes
// exceed the max download size, abort the download.
DDLogError(@"%@ Attachment download exceed expected content length: %lld, %lld.",
self.logTag,
(long long)progress.totalUnitCount,
(long long)progress.completedUnitCount);
abortDownload();
return;
}
[self fireProgressNotification:MAX(kAttachmentDownloadProgressTheta, progress.fractionCompleted)
attachmentId:pointer.uniqueId];
// We only need to check the content length header once.
if (hasCheckedContentLength) {
return;
}
// Once we've received some bytes of the download, check the content length
// header for the download.
//
// If the task doesn't exist, or doesn't have a response, or is missing
// the expected headers, or has an invalid or oversize content length, etc.,
// abort the download.
NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *)task.response;
if (![httpResponse isKindOfClass:[NSHTTPURLResponse class]]) {
DDLogError(@"%@ Attachment download has missing or invalid response.", self.logTag);
abortDownload();
return;
}
NSDictionary *headers = [httpResponse allHeaderFields];
if (![headers isKindOfClass:[NSDictionary class]]) {
DDLogError(@"%@ Attachment download invalid headers.", self.logTag);
abortDownload();
return;
}
NSString *contentLength = headers[@"Content-Length"];
if (![contentLength isKindOfClass:[NSString class]]) {
DDLogError(@"%@ Attachment download missing or invalid content length.", self.logTag);
abortDownload();
return;
}
if (contentLength.longLongValue > kMaxDownloadSize) {
DDLogError(@"%@ Attachment download content length exceeds max download size.", self.logTag);
abortDownload();
return;
}
// This response has a valid content length that is less
// than our max download size. Proceed with the download.
hasCheckedContentLength = YES;
}
success:^(NSURLSessionDataTask *_Nonnull task, id _Nullable responseObject) {
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
if (![responseObject isKindOfClass:[NSData class]]) {
DDLogError(@"%@ Failed retrieval of attachment. Response had unexpected format.", self.logTag);
NSError *error = OWSErrorMakeUnableToProcessServerResponseError();
return failureHandler(task, error);
}
successHandler((NSData *)responseObject);
});
}
failure:^(NSURLSessionDataTask *_Nullable task, NSError *_Nonnull error) {
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
DDLogError(@"Failed to retrieve attachment with error: %@", error.description);
return failureHandler(task, error);
});
}];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
}
- (void)fireProgressNotification:(CGFloat)progress attachmentId:(NSString *)attachmentId
{
NSNotificationCenter *notificationCenter = [NSNotificationCenter defaultCenter];
[notificationCenter postNotificationNameAsync:kAttachmentDownloadProgressNotification
object:nil
userInfo:@{
kAttachmentDownloadProgressKey : @(progress),
kAttachmentDownloadAttachmentIDKey : attachmentId
}];
}
- (void)setAttachment:(TSAttachmentPointer *)pointer
isDownloadingInMessage:(nullable TSMessage *)message
transaction:(YapDatabaseReadWriteTransaction *)transaction
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
{
OWSAssert(transaction);
pointer.state = TSAttachmentPointerStateDownloading;
[pointer saveWithTransaction:transaction];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
if (message) {
[message touchWithTransaction:transaction];
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
}
}
- (void)setAttachment:(TSAttachmentPointer *)pointer
didFailInMessage:(nullable TSMessage *)message
error:(NSError *)error
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
{
pointer.mostRecentFailureLocalizedText = error.localizedDescription;
pointer.state = TSAttachmentPointerStateFailed;
Explain send failures for text and media messages Motivation ---------- We were often swallowing errors or yielding generic errors when it would be better to provide specific errors. We also didn't create an attachment when attachments failed to send, making it impossible to show the user what was happening with an in-progress or failed attachment. Primary Changes --------------- - Funnel all message sending through MessageSender, and remove message sending from MessagesManager. - Record most recent sending error so we can expose it in the UI - Can resend attachments. - Update message status for attachments, just like text messages - Extracted UploadingService from MessagesManager - Saving attachment stream before uploading gives uniform API for send vs. resend - update status for downloading transcript attachments - TSAttachments have a local id, separate from the server allocated id This allows us to save the attachment before the allocation request. Which is is good because: 1. can show feedback to user faster. 2. allows us to show an error when allocation fails. Code Cleanup ------------ - Replaced a lot of global singleton access with injected dependencies to make for easier testing. - Never save group meta messages. Rather than checking before (hopefully) every save, do it in the save method. - Don't use callbacks for sync code. - Handle errors on writing attachment data - Fix old long broken tests that weren't even running. =( - Removed dead code - Use constants vs define - Port flaky travis fixes from Signal-iOS // FREEBIE
9 years ago
[pointer save];
if (message) {
[message touch];
}
}
- (BOOL)hasSupportedAttachments
{
return self.supportedAttachmentPointers.count > 0;
}
@end
NS_ASSUME_NONNULL_END